How to install car license plate
Recently, the topic of installing car license plates has sparked heated discussions on major social platforms and automotive forums. Many car owners have questions about the installation process when purchasing new vehicles or changing license plates, and have even been punished by traffic police for improper operation. This article will combine the popular discussions on the Internet in the past 10 days to provide you with a detailed analysis of the installation steps, precautions and common problems of car license plates.
1. Preparation work before license plate installation
| Tools/Materials Required | Quantity | Remarks |
|---|---|---|
| License plate (including anti-theft screws) | 1 set | Need to be verified to be consistent with vehicle information |
| Phillips screwdriver | 1 handful | It is recommended to use a magnetic screwdriver |
| License plate frame (optional) | 1 | Must comply with traffic regulations |
2. Detailed explanation of license plate installation steps
1.Locate the installation location: The front license plate should be fixed in the center of the front bumper of the vehicle, and the rear license plate should be installed in the designated area of the tailgate or trunk.
2.Use special anti-theft screws: According to the "Special Sealing Device for Motor Vehicle License Plate" (GA804-2008), the special sealing device issued by the vehicle management office must be used.
| Installation steps | Operational points |
|---|---|
| step one | Align the license plate hole position with the vehicle reserved hole position |
| Step 2 | First tighten the screws by hand to ensure accurate alignment |
| Step 3 | Use a screwdriver to tighten clockwise until it cannot turn. |
| Step 4 | Check whether the license plate is flat and has no warped edges |
3. Summary of recent hot issues
According to the statistics of an automobile forum in the past 10 days (from X month X to X month X, 2023):
| High frequency problem | frequency of occurrence | Official answer |
|---|---|---|
| Is the license plate frame required to be installed? | 427 times | It is not mandatory, but you must ensure that the number plate information is not blocked. |
| Is it legal to install it yourself? | 385 times | Self-installation is allowed, but must comply with national standards |
| The number of screws does not meet the requirements | 298 times | Install at least 4 fixed sealing devices (8 for new energy vehicles) |
4. Important matters needing attention
1.No blocking of number plates is allowed: According to the "Road Traffic Safety Law", intentionally blocking or defacing a license plate will be demerited with 12 points and fined 200 yuan.
2.Regularly check firmness: It is recommended to check the screw tightening condition once a month to prevent loosening due to vibration.
3.Special requirements for new energy vehicles: New energy vehicles need to be equipped with a total of 8 sealing devices at the front and rear, and the license plate size is 480mm × 140mm.
5. Professional advice
1. For first-time installation, it is recommended to go to a professional 4S store to ensure compliance with specifications.
2. If the license plate is damaged or lost, you must go to the vehicle management office to apply for a replacement in time. You cannot use license plates obtained through informal channels.
3. Special inspections of license plates have been carried out in many places recently (data shows that the number of cases of irregular installations investigated and dealt with in June 2023 increased by 23% year-on-year). It is recommended that car owners conduct self-examination as soon as possible.
Through the above structured guide, I believe you have a comprehensive understanding of the standardized installation methods of car license plates. Correct installation of license plates is not only a legal requirement, but also an important guarantee for driving safety. If you have any other questions, please leave a message in the comment area for discussion.
check the details
check the details
en
