What should I do if the lid of the water cup cannot be opened? Summary of popular solutions across the network in the past 10 days
Recently, there has been a surge in requests for help on social platforms regarding "water bottle lids cannot be opened", especially for stainless steel thermos bottles, plastic sports water bottles and other styles with strong sealing properties. The following are practical solutions compiled from popular discussions across the Internet in the past 10 days, including data analysis and detailed step-by-step explanations.
1. Statistics on the reasons why water cup lids cannot be opened are hotly debated across the Internet (last 10 days)
| reason | Mention frequency | Common cup shapes |
|---|---|---|
| Negative pressure adsorption | 58% | Stainless steel thermos cup |
| Thread stuck | twenty three% | Plastic sports water bottle |
| Silicone ring deformation | 12% | children's sippy cup |
| freeze after freezing | 7% | outdoor kettle |
2. Actual testing of 5 highly praised solutions
1. Thermal expansion and contraction method (applicable to negative pressure adsorption)
① Soak the bottom of the cup in hot water around 50℃ for 1 minute
② Quickly dry the lid area
③ Use anti-slip cloth when rotating counterclockwise
2. Rubber gloves increase friction method (the most popular on the entire network)
Douyin-related videos have been played 12 million times, and the actual activation success rate is 81%. Note that textured kitchen gloves work better.
3. Tap to release pressure
| Strike position | intensity | Things to note |
|---|---|---|
| Lid edge | medium intensity | Avoid knocking the glass |
| middle of cup bottom | Tap 3-5 times | Keep the cup upright |
4. Hair dryer heating method (suitable for plastic cups)
Actual measurement by Xiaohongshu users: Blow hot air against the threads for 30 seconds, and the success rate increases by 40%. Note that the temperature does not exceed 70°C.
5. Rubber band assisted method
Wrap 3-4 rubber bands around the cup lid to increase friction. The main evaluation of UP at Bilibili showed that a latex rubber band with a diameter of 5mm has the best effect.
3. Comparison of treatment options for cup lids made of different materials
| Material | Recommended method | Disable method |
|---|---|---|
| Stainless steel | Hot water soaking method, rubber hammer tapping | Pry open with sharp objects |
| PP plastic | Hair dryer heating and freezing treatment | boiling water |
| tempered glass | Rubber band method, rubber gloves | Tap the cup |
4. 3 tips to prevent the water bottle lid from opening
1. Leave 1/4 turn of wiggle room each time when tightening
2. Regularly replace the silicone sealing ring (recommended to check every 6 months)
3. After filling the hot water, open the exhaust valve and then seal it.
According to the hot search data on Weibo, the number of views of the topic #水杯不开的social moment# has reached 230 million. It is recommended to save this article for emergencies. If you still can't open it after trying all methods, you can contact the manufacturer to use professional cap opening tools.
check the details
check the details
en
